Official Bambu Lab build plates designed for reliable first-layer adhesion and clean print removal. Choose the correct machine, surface, and format (plate or sheet) from the variants to match your printer and printing needs.
Each variant corresponds to a specific Bambu Lab plate and compatibility.
Which surface should I pick?
Bambu Lab printers come with the Textured PEI Plate as standard. Pick the size of your printer, then the surface for your filament and the look you want.
Surface
Best for
Glue
Bottom of the print
Textured PEI
PLA, PETG, TPU, ABS, ASA, PC, nylon
Not needed. A thin layer helps PETG come off.
Textured, matte
Smooth PEI
PLA, PETG, TPU, ABS, ASA, PC, nylon
Needed for everything except PLA
Smooth and matte
Smooth and Textured PEI
Same as the two above, one on each side
As for the side you use
Flip it: smooth or textured
Cool Plate SuperTack (and SuperTack Pro)
PLA and PETG. Not for TPU or Bambu PLA Silk.
Not needed
Smooth
Engineering Plate
ABS, ASA, PC, nylon. Works with every Bambu Lab filament.
Always, a thin layer
Flat and smooth
High Temperature (sheet)
Same range as Smooth PEI. A replacement sheet for the High Temperature Plate.
Needed for everything except PLA
Smooth
Cool Plate
PLA only
Needed, even for PLA
Smooth
Starry, Galaxy, Diamond, Carbon Fiber
PLA and TPU. Best with silk or shiny filament.
Never
A pattern that changes color as the light moves
For Starry, Galaxy, Diamond and Carbon Fiber, choose Smooth PEI/High Temp Plate in Bambu Studio. Let the plate cool, then flex it to release the print. Wash it with dish soap, warm water and a sponge, then dry it. Never use acetone.
