Bambu Lab Reusable Spool - Pack of 5 (Refurbished)

A pack of five Bambu Lab reusable spools for use with compatible Bambu Lab filament refills and spool-less filament. Useful for keeping refill materials organized and ready for printing.

How to load a refill

1. Take the refill out of its bag. Leave its clear strap on for now, and keep the cardboard core of a 250 g refill.
2. Turn the reusable spool counterclockwise to open it into a wide half and a narrow half.
3. Line up the notch in the refill's cardboard core with the clip on the wide half and press the coil into place.
4. Put the narrow half back and turn it clockwise until it clicks.
5. Peel the strap near the filament end, cut off any bent tip and push the end into the round hole on the spool. Then remove the rest of the strap.
6. Press both sides of the coil until it sits flat against the spool, so the filament cannot tangle. Stick on the new label.

Heat limit: Bambu Lab makes a white Low Temp spool (up to 70 °C, for PLA and PETG) and a black High Temp spool (up to 90 °C, for ABS, PC, nylon blends and more). Check yours before drying above 70 °C, for example in an AMS HT.